Copper Tube and Fittings for Plumbing Application

Copper tube and fittings are suitable for use in a diverse range of applications in building construction, which is testimony to their ability to provide long trouble-free service under a multitude of service conditions.
Copper’s reputation for excellence is based on decades of actual service experience in these applications. No accelerated tests which may or may not turn out to be accurate are involved.
And the bottom-line is copper systems are cost-effective. When material cost, installation cost, and maintenance expenses over the life of a system are considered, copper becomes the solid choice for top performance at reasonable cost.

Plumbing

Underground Water Services:
From the water main to the house or building, either Type K or L soft temper tube is used. They are available in long coils of various lengths in nominal sizes up to 2 in. With coils intermediate joints can be eliminated or minimized.

Copper Tube and Fittings for Plumbing Application

Copper Tube and Fittings for Plumbing Application

Soft tube can also be bent around any obstructions or unevenness in the trench, and it adjusts readily to ground settlement.
Compression fittings have become the most popular choice for underground copper water services in recent years, because of their high strength and ease of installation.
Hot and Cold Water Lines: Systems above ground inside houses and buildings are the biggest single application for copper tube and fittings. Copper installations extend from houses and vacation properties to office towers and multi-storey apartments, condominiums, and hotels. Hard temper Types L and M tube are commonly used, depending on service conditions; hard Type K may be needed in some cases. Canadian codes, except for British Columbia, allow Type M tube as the minimum requirement, and it is the most widely used. In B.C., Type L is required, because of water conditions.
Special care should be taken with hot water recirculation systems.
Renovation and Remodeling: When remodeling, situations may be encountered in which soft temper tube, normally Type L, can be used to advantage, since its flexibility permits it to be worked inside partition walls with a minimum of difficulty.
Drainage, Waste & Vent Systems: Type DWV tube with solder fittings is available in hard temper only. It is used above ground in multi-unit and high-rise buildings for drainage, waste and vent lines, and it should be considered particularly when noncombustible construction requirements must be met.
Rainwater Leaders: Type DWV tube may also be used for rainwater leaders inside of buildings.

C12200 Medical Gas Copper Pipe

C12200 Medical Gas Copper Pipe

Gas Copper Pipes for Construction,13mm Air Conditioner Copper Pipe,Pankcake Coil Copper Pipe C12200 Medical Gas Copper Pipe Type:Pancake Coil Copper Pipe Application:Air Condition Or Refrigerator Specification:Customized Outer Diameter:6mm-60 Mm Grade: C10100 Thickness: 0.1mm~300mm Length:Customers’ Requirement Cu (Min):99.9% Alloy Or Not:Is Alloy Ultimate Strength (≥ MPa):205 Elongation (≥ %):40% Wall Thickness: 0.2mm~120mm Outside Diameter: 3mm-400mm Standard: […]

Customized Size Copper Pipe

Customized Size Copper Pipe

Straight Copper Pipe,32mm Copper Pipe Tube Customized Size Copper Pipe Type:Straight Copper Pipe Application:Water Tube Specification:Required Grade: C11000 C10200 C12000 C12200 Length:Customers’ Requirement Cu (Min):99.90% Alloy Or Not:Non-alloy Ultimate Strength (≥ MPa):32-50 Elongation (≥ %):10-45 Wall Thickness: 0.1mm-50mm Outside Diameter: 3mm-400mm Temper:soft annealed,special tempers Product Name: Customized Size Copper Pipe Material:copper Color: red Standard: DIN […]Copper Tube and Fittings for Plumbing Application

32mm Copper Pipe Tube

32mm Wholesale Copper Pipe Tube

Round Copper Tube,Air Conditioner Copper Tube,Refrigeration Copper Tube 32mm Wholesale Copper Pipe Tube Type:Straight Copper Pipe Application:Air Conditioner Specification: C11000, C10200, C12000, C12200 Outer Diameter: 4mm – 219mm Grade:Cooper Thickness: 0.35mm – 5.5mm Length: 1000mm – 10000mm, 1000mm – 10000mm Cu (Min):99.99% Alloy Or Not:Non-alloy Ultimate Strength (≥ MPa):205—245 Elongation (≥ %):35% – 40% Wall […]Copper Tube and Fittings for Plumbing Application

Refrigeration Copper Tube

Refrigeration Copper Tube

Round Shape End Cap Copper Tube,Flexible Copper Pipes,13mm Air Conditioner Copper Pipe Specifications of Refrigeration Copper Tube Grade: C10200,C11000,C12000,C21000,C22000,etc. OD:2~910mm, WT:0.2~120 mm,Length:1~12 m. Length: 5.8m,6m,11.8m,12m,or as required Hardness :1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard,soft,etc Surface : mill,polished,bright,oiled,hair line,brush,mirror,sand blast,or as required. Package: Export standard package: bundled wooden box, suit for all kinds of transport or […]Copper Tube and Fittings for Plumbing Application