Brass Rods

//Brass Rods
  • Standard Specification for Free-Cutting Brass Rod, Bar and Shapes

Standard Specification for Free-Cutting Brass Rod, Bar and Shapes

Standard Specification for Free-Cutting Brass Rod, Bar and Shapes This standard is issued under the fixed designation B 16/B 16M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript [...]

By |December 22nd, 2021|BAR, BRASS & COPPER, Brass Alloys, Brass Applications, Brass Bars, Brass Rods, Brass Shapes, Brass Types, DoWeDo News, Grade, Metal, ROD|Comments Off on Standard Specification for Free-Cutting Brass Rod, Bar and Shapes
  • C37700 Brass Round Bar

C37700 Brass Round Bar

C37700 Brass Round Bar, Forging Brass Rod Forging Brass Rod is a process that yields a stronger, denser brass component. These Manganese Brass Bars can accurately display the intricacies of any given design. Forged brass is often considered to be tougher in comparison to casting brass. Uns C37700 Brass Round Bar, Forged Brass Bars, brass [...]

By |December 10th, 2021|BAR, BRASS & COPPER, Brass Alloys, Brass Bars, Brass Rods, Brass Shapes, Brass Types, C37700, Grade, Metal, ROD|Comments Off on C37700 Brass Round Bar
  • Forging Brass Rod

Forging Brass Rod

Forging Brass Rod Forging Brass Rod is a process that yields a stronger, denser brass component. These Manganese Brass Bars can accurately display the intricacies of any given design. Forged brass is often considered to be tougher in comparison to casting brass. Uns C37700 Brass Round Bar, Forged Brass Bars, brass rod manufacturers brass bar [...]

By |November 12th, 2021|BRASS & COPPER, Brass Applications, Brass Bars, Brass Parts, Brass Rods, Brass Shapes, Brass Types, C37700|Comments Off on Forging Brass Rod
  • C36000 Free-Machining Brass

C36000 Free-Machining Brass

C36000 Free-Machining Brass ASTM B16 Specs Level 4 Lead Content of 2.5% to 3.7% Level 3 Ability for Free Machining Level 2 Ability for Free Cutting WINDO Brass Copper Ltd. maintains a extensive inventory of C36000 free cutting brass bar in round rod, sharp corner hex bar, radius corner hex bar, square bar, and rectangle [...]

By |November 10th, 2021|BRASS & COPPER, Brass Alloys, Brass Rods, Brass Shapes, Brass Types, C36000, DoWeDo News|Comments Off on C36000 Free-Machining Brass
  • Free Cutting Brass Rod

Free Cutting Brass Rod

Free Cutting Brass Rod Brass grade C36000 is commonly referred to as Free Cutting Brass Rod or as Free Machining Brass. Since the H C3602 Free Cutting Brass Rods have a machinability rating of 100 this alloy is often considered to be a standard against which all other metals are to be measured. Manufacturer of [...]

By |November 8th, 2021|BRASS & COPPER, Brass Alloys, Brass Applications, Brass Components, Brass Rods, Brass Shapes, Brass Types, DoWeDo News, Metal Knowledge, ROD|Comments Off on Free Cutting Brass Rod
  • ASTM B16 Brass

ASTM B16 Brass

ASTM B16 Brass WINDO Brass Copper carries an extensive inventory of C36000 free-cutting brass round rod, hex rod, bar, and shapes of any specified cross-section manufactured to the ASTM B16 standard. Our C36000 brass has a lead substance of 2.5% to 3.7%, which allows the brass to be free-machined. This C36000 alloy is great for [...]

By |November 6th, 2021|BAR, Brass Alloys, Brass Applications, Brass Rods, Brass Shapes, Brass Types, DoWeDo News, Grade, Metal, Metal Knowledge|Comments Off on ASTM B16 Brass

Brass Parts Casting Process

The brass parts casting process usually includes: 1. Mold preparation (container for making liquid metal into solid casting). Mold can be divided into sand mold, metal mold, ceramic mold, mud mold, graphite mold, etc. according to the materials used, and can be divided into disposable mold, semi permanent mold and permanent mold according to the [...]

By |August 7th, 2021|Brass Accessories, Brass Fasteners, Brass Parts, Brass Rods, Brass Shapes, Brass Tubes|Comments Off on Brass Parts Casting Process

Difference Between Copper Tube and Brass Tube

Difference between copper tube and brass tube 1. The appearance is different in color When we observe the copper tubes and brass tubes, we will find that the color of brass is generally golden yellow, which is more lustrous, but the color of copper tube is rose red, which is also lustrous, so we can [...]

By |July 25th, 2021|Brass Pipes, Brass Rods, Brass Shapes, Brass Tubes, Brass Tubing, Copper, Copper Pipe, Copper Tubes|Comments Off on Difference Between Copper Tube and Brass Tube

Surface Pretreatment of Brass Rod

Surface pretreatment of brass rod In order to ensure a good adhesion between decorative coating (plating) and the surface of iron products, the oxide scale, welding slag, rust mark, grease, dirt and water on the surface of iron products must be removed as much as possible before the coating (plating) is carried out, otherwise it [...]

By |July 21st, 2021|Brass Rods, Brass Shapes, Brass Tubes, Brass Tubing|Comments Off on Surface Pretreatment of Brass Rod

Properties of Brass Rod

Properties of brass rod Brass Rod and copper tube 1. The eco-friendly brass has good strength and corrosion resistance, at the same time, it has good toughness, which ensures good machinability in mechanical properties. 2. The content of lead in copper alloy is between 7% and 15%, which can effectively make the copper alloy cut [...]

By |July 17th, 2021|Brass Pipes, Brass Rods, Brass Shapes, Brass Tubes, Brass Tubing|Comments Off on Properties of Brass Rod

The Properties of Brass Tube

The properties of brass tube It is understood that brass is a binary alloy of copper and zinc, also known as simple brass or ordinary brass. Brass tubes with different mechanical properties can be obtained by changing the content of zinc in brass. The higher the zinc content in brass, the higher the strength, but [...]

By |June 27th, 2021|Brass Parts, Brass Pipes, Brass Rods, Brass Sections and Profiles, Brass Shapes, Brass Tubes, Brass Tubing|Comments Off on The Properties of Brass Tube

Minimum Diameter of Brass Tube

Minimum diameter of brass tube The strong and corrosion-resistant characteristics of brass pipe make it the first choice for modern contractors to install water pipes, heating and cooling pipes in all residential commercial houses. Brass pipe is the best water supply pipe. Brass tube characteristics: light weight, good thermal conductivity, high low temperature strength. It [...]

By |June 22nd, 2021|Brass Pipes, Brass Rods, Brass Shapes, Brass Tubes, Brass Tubing|Comments Off on Minimum Diameter of Brass Tube

Which is good for the body, copper or brass?

Which is good for the body copper or brass? Copper is a product that can be seen everywhere in our life. We all know that copper is very powerful in electrical conductivity. Does copper have any effect on our body? Which one is better, red copper or brass? Let's talk about it. 1. Brass contains [...]

By |June 13th, 2021|Brass Pipes, Brass Rods, Brass Shapes, Brass Tubes, Copper, Copper Pipe, Copper Sheet, Copper Tubes|Comments Off on Which is good for the body, copper or brass?

Welding Characteristics of Brass Pipe

Welding characteristics of brass pipe Brass pipe welding can be divided into soft welding and hard welding, soft welding temperature is lower than 450 ℃, hard welding temperature is higher than 450 ℃. Hard welding is usually used for silver, gold, steel, copper and other metals, its welding point is much stronger than soft welding, [...]

By |May 21st, 2021|Brass Pipes, Brass Rods, Brass Shapes, Brass Tubes, Brass Tubing|Comments Off on Welding Characteristics of Brass Pipe

Hollow Brass Rod Has Good Machinability

Hollow brass rod has good machinability Hollow brass bar is a kind of non-ferrous metal processing bar, which has good processing performance and high conductivity. It is mainly divided into brass rod (copper zinc alloy, cheaper) and red copper rod (higher copper content). Hollow brass rod is a rod-shaped object made of copper and zinc [...]

By |May 19th, 2021|Brass Pipes, Brass Rods, Brass Shapes, Brass Tubes, Brass Tubing|Comments Off on Hollow Brass Rod Has Good Machinability
error: Content is protected !!