Monthly Archives: October 2022

//October
  • CuNi 9010 Copper Nickel Pipe Fittings

CuNi 90/10 Copper Nickel Pipe Fittings

CuNi 90/10 Copper Nickel Pipe Fittings copper nickel fittings are fabricated from high-grade CuNi 90/10 or CuNi 70/30 material. It has excellent corrosion and erosion resistance, with better weldability. EEMUA 234 UNS 7060x COPPER NICKEL 90/10 ELBOW, 70/30 CUNI PIPE ELBOW SUPPLIER, EXPORTER OF CU-NI SHORT RADIUS ELBOW, CUNI 90/10 LONG RADIUS ELBOW, CUPRO NICKEL [...]

By |October 31st, 2022|BAR, BRASS & COPPER, Copper, Copper Fittings, Copper Nickel, Copper Nickel Tube, Copper Pipe, Copper Tubes, DoWeDo News, Grade, Metal, Metal Knowledge, ROD|Comments Off on CuNi 90/10 Copper Nickel Pipe Fittings
  • ASTM B466 C71500 Pipes Copper Nickel Tube

ASTM B466 C71500 Pipes Copper Nickel Tube

ASTM B466 C71500 Pipes,Copper Nickel Tube ,BFe30-1-1,CuNi30Mn1Fe,CUNI 70/30 cupronickel tube C71500 Copper Nickel, also known as 70/30 Copper Nickel,BFe30-1-1,CuNi30Mn1Fe, offers excellent corrosion resistance, especially in marine saltwater environments. The main wrought Copper Nickel alloys chosen for sea water service contain 30% Nickel. We also supply copper alloy complementary products for heat exchanger applications. Finned Tube,Tubesheet, [...]

By |October 28th, 2022|BAR, BRASS & COPPER, C71500, Copper, Copper Pipe, Copper Tubes, DoWeDo News, Grade, Metal, Metal Knowledge, ROD|Comments Off on ASTM B466 C71500 Pipes Copper Nickel Tube
  • All Kinds of Shape Copper Bar

All Kinds of Shape Copper Bar

All Kinds of Shape Copper Bar All Kinds of Shape Copper Bar Specification: *Standard: ASTM B453/ASTM B16/ASTM B21 *Materials: C11000 (T2), C12200(TP2) etc. *Type: Copper, Orignal Brass, Free cutting brass rod, Lead Brass, Arsenic-Silicon Brass, *Lead-free copper rod etc. *Shape: Round/ Hexagonal-shaped/ Square *Width or diameter: Round Rod:4 ~ 65mm Square rod: 4 [...]

By |October 25th, 2022|BAR, BRASS & COPPER, Copper, Metal, ROD|Comments Off on All Kinds of Shape Copper Bar
  • C69400 Silicon Red Brass

C69400 Silicon Red Brass

We are known as the distinguished manufacturer, exporter and supplier of a wide gamut of Silicon Red Brass. It is widely demanded in plumbing and piping industries for the processing of different equipments. The provided metal is manufactured by our adroit professionals using top-notch quality metal alloys and advanced machinery as per the set international [...]

By |October 23rd, 2022|BRASS & COPPER, Brass Shapes, Metal, ROD, Tubing|Comments Off on C69400 Silicon Red Brass
  • Brass Picture Wire 150m reels no 3

Brass Picture Wire 150m reels no 1, 2 and 3

Brass Picture Wire 150m reels no 1, 2 and 3, Picture Hanging Copper Wire Delivery to China via courier 1 - 2 days Brass strands braided around a single rust resistant strand of steel for extra strength. Strength No1 = 6kg No2 = 11 kg No3 = 18kg Brass Picture Wire 150m reels no [...]

By |October 21st, 2022|BRASS & COPPER, Coil, Metal|Comments Off on Brass Picture Wire 150m reels no 1, 2 and 3
  • brazed copper-brass radiators

Aluminum VS. Copper-Brass Radiator: Construction Differences

Aluminum VS. Copper-Brass Radiator: Construction Differences Aluminum Copper-Brass Construction - So far in our journey through the topic of aluminum vs. copper-brass radiators, we've explored how a radiator transfers heat from the coolant to the air. Now we'll take a look at the differences in how aluminum and copper-brass radiators are built. In our previous [...]

By |October 19th, 2022|Aluminium, BRASS & COPPER, Copper|Comments Off on Aluminum VS. Copper-Brass Radiator: Construction Differences
  • brazed copper brass radiators

Brazed Copper Brass Radiators Design Innovations

Brazed Copper Brass Radiators Design Innovations Low Weight, Low Cost, Long Life Over the next few years, new copper-brass car and truck radiators that could last ten years will debut in the automotive industry. They are fully competitive with today's aluminum counterparts. Based on technological advances and design innovations developed with research funding from the [...]

By |October 16th, 2022|BRASS & COPPER, Copper|Comments Off on Brazed Copper Brass Radiators Design Innovations
  • Copper Rods & Profile

Copper Rods & Profile

Copper Rods & Profile Copper Rods & Profile are alloys of metals with copper as their major component. Our range of Copper Rods & Profile is available in various shapes like round, square and hex. These alloys are offered at reasonable prices and are known for their high conductivity, corrosion resistant and fine finish. To [...]

By |October 13th, 2022|BRASS & COPPER, Copper, Metal, Profile|Comments Off on Copper Rods & Profile
  • Steel & Metals

DWD Steel & Metals

DWD Steel & Metals STAINLESS STEEL: SHEET, PLATE, ANGLE, ROUND, SQUARE, RECTANGULAR, HEXAGONAL, PIPE, TUBING, HOLLOW BAR HIGH PERFORMANCE ALLOYS: HASTELLOY, INCONEL, MONEL, NITRONIC, STELLITE, DUPLEX, 254 SMO, TITANIUM ALUMINUM: SHEET, PLATE, ANGLE, ROUND, SQUARE, RECTANGULAR, HEXAGONAL, PIPE, TUBING, BUS BAR TOOL STEEL: COLD WORK, HOT WORK, CUTTING, PLASTIC MOLDStructural-Steel-Square-Tube Steel & Metals [...]

By |October 10th, 2022|BAR, BRASS & COPPER, CARBON & ALLOY STEEL, FLAT ROLLED, HEXAGONAL, Metal, PIPE, PLATE, SHEET & COIL, Steel, STRUCTURAL, TUBING, Tubing|Comments Off on DWD Steel & Metals
  • Choosing Tubing Material

Choosing the Right Tubing Material

Choosing the Right Tubing Material - When selecting tubing for your application one of the biggest factors beyond size is the type of material you may need. Tubing is necessary in both complex and basic machinery for all types of applications to function. Today, we will take a deeper look into some of the most [...]

By |October 7th, 2022|Carbon Steel Tubing, Copper Tubing, Stainless Steel Tubing, Tubing, Tubing Material|Comments Off on Choosing the Right Tubing Material

Copper Tube

Copper Tube Detailed Introduction Copper Tube Overview The copper tubes required for this project are drawn, seamless tubes made from copper 122000. The dimensions specified for the tubes are, 445.00mm +/-0.250mm long with an outer diameter of 5.750mm +/- 0.013mm and a wall thickness of 0.250mm +/- 0.013mm. The contract to make these tubes has been [...]

By |October 4th, 2022|Copper Tubing, Seamless Tubes, Tubing, Tubing Material|Comments Off on Copper Tube
  • Brass Bar for Precise Instrument

Brass Bar for Precise Instrument

Brass Bar for Precise Instrument Brass bar for precise instrument is a rod-shaped alloy made of copper and zinc, which is used for precise instrument. As extrusion brass bar, it possesses the characteristics of high corrosion resistance, outstanding processing ability and good conductivity. Alloy and production standard: C12200, C22000, C23000, C26000, C27000, C27200, C38000 (ASTM [...]

By |October 1st, 2022|BRASS & COPPER, Brass Alloys, Brass Applications, Brass Shapes, Brass Tubes, DoWeDo News, Grade, Metal, Metal Applications, Metal Knowledge, TUBING, Tubing, Tubing Material|Comments Off on Brass Bar for Precise Instrument
error: Content is protected !!