Monthly Archives: October 2021

//October

Welding Sequence of Red Copper Pipe

Welding sequence of red copper pipe and problems needing attention Generally, 50%, 45%, 35% or 25% silver electrodes shall be used for the welding of copper pipes, which shall have good fluidity and the help of flux. The flux used shall be flexible mixture or powder, carbonization flame for copper pipe welding. Welding sequence of [...]

By |October 28th, 2021|Copper, Copper Pipe, Copper Rod & Bsr, Copper Tubes, Copper Tubing, Tubing|Comments Off on Welding Sequence of Red Copper Pipe

Application of Copper Pipe

Application of copper pipe Common copper pipes (industrial pure copper) and brass pipes (copper zinc alloy) are divided into control pipes, rolled pipes and extruded pipes according to different manufacturing methods. Generally, drawn pipes are used for medium and low pressure pipes. Copper tubes and brass tubes are mostly used in heat exchange equipment; It [...]

By |October 25th, 2021|Copper, Copper Pipe, Copper Rod & Bsr, Copper Tubes|Comments Off on Application of Copper Pipe

Correct Copper Plate Cleaning Method

Correct copper plate cleaning method Red copper is more widely used than pure iron. Every year, 50% of copper is electrolyzed and purified into pure copper, which is used in the electrical industry. The red copper mentioned here is really very pure, with copper content of 99. More than 95%. A very small amount of [...]

By |October 22nd, 2021|Copper, Copper Cable, Copper Coils, Copper Parts, Copper Plate, Copper Precision Components, Copper Sheet|Comments Off on Correct Copper Plate Cleaning Method
  • Copper Pipe, Tubing & Fittings

Air Conditioning Copper Pipe Welding Experience

Air Conditioning Copper Pipe Welding Experience: Silver welding is generally used for copper pipe - copper pipe welding, and the silver content of silver electrode is 25%, 15% or 5%. Copper phosphorus series electrodes can also be used. They all have good fluidity and do not need flux. Copper pipe is an important raw material [...]

By |October 20th, 2021|Copper, Copper Pipe, Copper Tubes|Comments Off on Air Conditioning Copper Pipe Welding Experience

Copper Bar Processing

Copper bar processing: The necessary tools for copper bar manufacturing shall be prepared for copper bar processing to reduce the manufacturing error of copper bar. The calculation of copper bar blanking makes full use of Pythagorean theorem. In the calculation of copper bar, pay attention to adding or subtracting the thickness of copper bar to [...]

By |October 14th, 2021|Copper, Copper Parts, Copper Plate, Copper Sheet, Copper Strips, Copper Tape, Copper Tubes|Comments Off on Copper Bar Processing

Copper Strip Degreasing Methods

Copper strip degreasing methods include solvent degreasing, alkali degreasing, ultrasonic degreasing, high-pressure hot water degreasing, electrolytic degreasing, etc. 1. Solvent degreasing The degreasing solvent is used to dissolve the oil on the strip surface and collect it into a container. The volatile solvent is volatilized, collected and reused, and the pollutants are separated from the [...]

By |October 8th, 2021|Copper, Copper Parts, Copper Strips, Copper Tape, Copper Wires|Comments Off on Copper Strip Degreasing Methods
error: Content is protected !!