Bronze Shapes

/Bronze Shapes
  • BRONZE VS. BRASS SYNCHRO RINGS

BRONZE VS. BRASS SYNCHRO RINGS

BRONZE VS. BRASS SYNCHRO RINGS All of our DSM rebuilds include updated bronze synchronizer rings. Over the years we have been upgrading the OEM lined rings with brass rings. These rings work very well, but we found bronze rings work even better. Bronze consists of mainly copper and tin, and brass consists of mainly copper [...]

By |December 4th, 2021|BRASS & COPPER, Brass Accessories, Brass Alloys, Brass Components, Brass Parts, Brass Types, Bronze, Bronze Casting, Bronze Shapes|Comments Off on BRONZE VS. BRASS SYNCHRO RINGS
  • Bronze, Copper or Brass Tube Some Considerations for Contractors

Bronze, Copper or Brass Tube: Some Considerations for Contractors

Bronze, Copper or Brass Tube: Some Considerations for Contractors While most professional contractors tend to shy away from non-steel metals and alloys due to material costs, choosing either copper, bronze, or brass tube is more beneficial in the long run. Compared to other popular materials, metal and alloy tubes are stronger, more resilient, and definitely [...]

By |September 20th, 2021|Brass Parts, Brass Pipes, Brass Tubes, Bronze, Bronze Shapes, Copper, Copper Pipe, Copper Tubes, DoWeDo News, Metal Applications, Metal Knowledge|Comments Off on Bronze, Copper or Brass Tube: Some Considerations for Contractors

Copper vs Bronze

Key Difference – Copper vs Bronze Many differences can be observed between Copper and Bronze based on their composition, usage, and properties. Copper is a pure chemical element and a natural mineral that can be found mainly in the earth’s crust and water in smaller quantities. In contrast, bronze is an alloy which contains copper [...]

By |September 16th, 2019|BRASS & COPPER, Bronze, Bronze Shapes, Copper|Comments Off on Copper vs Bronze
  • What is the difference between Copper and Bronze

What is the difference between Copper and Bronze?

What is the difference between Copper and Bronze? Composition of Copper and Bronze Copper: Copper is naturally present in the earth’s crust as a mineral at a concentration of 50 ppm. The primary source of copper is Copper iron sulfide (CuFeS2), which is also known as chalcopyrite. But, it exists in pure form as a [...]

By |September 3rd, 2019|Aluminum Bronze, Architectural Bronze, BRASS & COPPER, Bronze, Bronze Shapes, Commercial Bronze, Copper, DoWeDo News, Silicon Bronze|Comments Off on What is the difference between Copper and Bronze?

Bronze Alloys for the Aerospace Industry

Bronze Alloys for the Aerospace Industry DOWEDO Metals offers a range of alloys for aerospace applications. Aerospace alloys are used for a wide variety of applications, such as bearings and bushings in landing gears and cargo doors, wheel and brake components, wing and tail actuators, hydraulic pump components, pylons, and many other demanding applications where [...]

By |March 1st, 2019|Aluminum Bronze, Bronze, Bronze Shapes, DoWeDo News, Metal, Metal Knowledge, Tin Bronze|Comments Off on Bronze Alloys for the Aerospace Industry

Bronze Square Tube, Bar, or Sheet Apart Characteristics

Bronze Square Tube, Bar, or Sheet Apart Characteristics Choosing a metal for your project is not as easy now as it was centuries ago. With a new alloy being discovered almost every year, you definitely have a lot more choices now. It can get quite confusing, especially if you have no idea how to identify [...]

By |February 25th, 2019|BAR, Bronze, Bronze Casting, Bronze Shapes, Metal, Metal Knowledge, PIPE, ROD, SHEET & COIL, TUBING|Comments Off on Bronze Square Tube, Bar, or Sheet Apart Characteristics
error: Content is protected !!