Brass Flare Fittings
Flare fittings are a type of compression fitting used with metal tubing, usually Soft copper tube and pipe , Tube flaring is considered to be a type of forging operation, and is usually a cold working procedure. During assembly, a flare nut is used to secure the flared tubing’s tapered end to the also tapered fitting, producing a pressure-resistant, leak-tight seal. Flared connections offer a high degree of long-term reliability and for this reason are often used in mission-critical and inaccessible locations
We manufacture a wide range of Brass flare nuts Brass flare fittings Brass flare unions Brass flare adapters Brass flare connectors Brass Flare tees Flare elbows Flare Cap nuts etc which are 37* degree JIC threaded fittings with a fine chamfer inside to allow high quality Copper tube flaring.
Brass Flare Union Brass Flare Tee Flare Nuts Forged Flare Nuts
Brass Flare Union Flare Tee Flare Nuts Forged Flare Nuts
Brass Flare Elbow Brass Flare Connectors Brass Flare Cap Nuts
Brass Flare Elbow Brass Flare Connectors Brass Flare Cap Nuts
We offer Brass Compression Fittings Brass Tube Fittings Brass Flare Fittings Brass flare nuts Brass adapters Brass metric Compression fittings Brass bushes plugs Brass tees elbows Brass Compression tees Brass Elbows Male Connectors Brass Compression Fittings Plumbing Compression Fittings Brass Pipe Compression Fittings double ferrule compression fittings parker Legris type Swagelok type BSPT BSP NPT Metric Compression fittings Brass Fittings
Brass Flare Fittings
Special Brass Compression Fittings
We shall be pleased to develop Non-Standard Brass Compression fittings as per specific requirements
Material Used
Brass natural, Electro-Tinned, Chrome Nickel etc
Brass Compression Fittings
ISO Metric, BSW, BA, BSF, UNC, UNF UNEF etc.
2mm 3mm 4mm 5mm 6mm 8mm 10mm 12mm 16mm 20mm 25mm 32mm
1/8″ 5/32″ 3/16″ 1/4″ 5/16″ 3/8″ 1/2″ 5/8″ 3/4″ 1″ 11/8″ 11/4″ 11/2″ 13/4″ 2″
Finish
Brass natural, Electro-Tinned, Nickel etc.
We offer Brass Components to user drawings and prints We specialize in machined
Brass Components Brass Turned Components Small big cast Machined Brass Components
cast brass Components Forged brass Components Stamped Brass Components from miniature1mm to 200mm Brass Components Turned Brass Components to custom specification
Special Brass Components.
We Shall Be Pleased to Develop Non-Standard Brass Components Nuts Screws Stud’s Fixings
Wood Screws Machine Screws Fasteners as per Specific Requirements
Material Used
Brass to BS 2874 / 2872
Brass Components Threads
ISO Metric, BSW, BA, BSF, UNC, UNF UNEF etc.
2mm 3mm 4mm 5mm 6mm 8mm 10mm 12mm 16mm 20mm 25mm 32mm 1/8″ 5/32″ 3/16″ 1/4″ 5/16″ 3/8″ 1/2″ 5/8″ 3/4″ 1″ 11/8″ 11/4″ 11/2″ 13/4″ 2″
Finish
Brass natural, Electro-Tinned, Nickel etc.
Copper Fittings – Australian Standard AS 3688
Copper Pipe, Tubing & Fittings
Copper Tube and Fittings for Heating Applications
Leaded Brass Rods Extrusion Fittings
How To: Solder Copper Pipe Fittings
90 Degree Elbows Brass Pipe Fittings
