ASTM B111 C71500 CuNi90 Copper Nickel Tubing, Brass Alloy Tube Copper Nickel Tubing C71500 CuNi90

Admiralty Brass Tube for condenser and heat-exchangers series:
1)Up to GB/T8890 / ASTM B111 / JIS H3300 / BS EN12451 standards and so on.
2) Material Brand of Admiralty Brass Tube:

Grade USA U.K Germany Japan
HSn70-1 C44300 443 CZ111 CuZn28Sn1 2.0471 C4430
3)Tubes temper: All tempers are available (Goods supply state: Annealed condition)
4)Dimensions: Outer diameter:5-100mm, Wall thickness: 0.5-10mm or according to the

buyers’ requirements, and also length and tolerance subject to the buyer’s decisions.
5)Tubes in good straightness, with clean surface of both inside and outside
6)Application range: Admiralty Brass Tube for condenser and heat-exchangers, Water

Evaporators, Boiler Blowdown Heat Exchangers, air coolers, Gland Steam Condensers,

Steam Ejector, Turbine Oil Coolers, Fuel Oil Heaters, Compressed Air Inter and After Coolers,

Ferrules, Oil Well Pump Liner , Distiller , Marine Industry , and Nuclear Power etc.

ASTM B111 C71500 CuNi90 Copper Nickel Tubing

ASTM B111 C71500 CuNi90 Copper Nickel Tubing

C71500 Copper Nickel “90/10″ASTM B151, MIL C15726F, SAE J461, SAE J463C70600 (C706) &

C71500 (C715), Copper nickel offers excellent corrosion resistance, especially in marine salt water environments.

The main, wrought copper-nickel alloys chosen for sea water service contain 10 or 30 percent nickel. They also have important additions of iron and manganese which are necessary to maintain good corrosion resistance.

Typical Uses for C706 Copper Nickel

“90/10″:AUTOMOTIVE: Power Steering Tube, Brake Lines
CONSUMER: Screw Lamp Bases
INDUSTRIAL: Condenser Plates, Condensers, Weld Torch Tips, Heat Exchanger Tubes, Valve Bodies,
Evaporator Tubes,
Pressure Vessels, Distiller Tubes, Pump Impellers for Oil Refining, Ferrules, Evaporators
MARINE: Boat Hulls, Tube Sheet for Salt Water Service, Salt Water Pipe Fittings, Salt Water Piping
Systems, Salt Water
Piling Wrap, Hot Water Tanks, Salt Water Baffles, Propeller Sleeves, Ship Hulls, Water Hoses
PLUMBING: FlangesSizes Available From Hehong Precision(New Huahong Copper)TUBE&PIPE:
1/4″ – 16” diameter ,
6.35mm – 419mm diameter for seamless.
Bar:8-90,100,168mm diameter.

ETP Copper Tubes

How to Polish Brass Jewelry

Forging Brass Rods

Copper Pipe: Sweat Soldering vs Brazing

C70600 CuNi90-10 Copper Nickel Condenser Tube

Refrigeration Copper Tubing Coil

Copper Tubing Coils

Copper Pipe Fittings

Brass metal

Brass and Copper Products