C70600 CuNi90-10 Copper Nickel Condenser Tube, Tube Condenser ASTM B111 Uns C70600 CuNi90-10 Copper Nickel Condenser Tube,ASTM B466 C70600

ASTM B111 UNS C70600 Tube Cu-Ni 90/10 Seamless tube, Copper Nickel 90/10 C70600 Tube
ASTM B111 UNS C70600 tube Condenser

ASTM B 111 Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock , condenser tube

Used:Evaporator, Heat Exchanger, Condenser, Distiller ,Air-Condition

Copper-Nickel Alloy tube:
1)Up to GB/T8890/ASTM B111/JIS H3300/BS EN12451 standards and so on.
2)Material designation: BFe10-1-1 / C70600 / C7060X / CuNi10Fe1Mn / CuNi9010 / Cu90Ni10 and BFe30-1-1 / C71500 / CuNi30Mn1Fe / CuNi7030 / Cu70Ni30 or other alloy
Material Brand of Copper-Nickel Alloy tube:
Grade USA U.K Germany Japan
BFe10-1-1 C70600 CN102 CuNi10Fe1Mn C7060
BFe30-1-1 C71500 CN107 CuNi30Mn1Fe C7150
3)Tubes temper: All tempers are available (Goods supply state: Annealed condition)
4)Dimensions: Outer diameter:5-419mm, Wall thickness: 0.5-10mm or according to the buyers’ requirements, and also length and tolerance subject to the buyer’s decisions.
5) Tubes in good straightness, with clean surface of both inside and outside
6)Application range: Copper-Nickel Alloy tube for condenser and heat-exchangers, Water Evaporators, Boiler Blowdown Heat Exchangers, air coolers, Gland Steam Condensers, Steam Ejector, Turbine Oil Coolers, Fuel Oil Heaters, Compressed Air Inter and After Coolers, Ferrules, Oil Well Pump Liner, Distiller , Marine Industry , and Nuclear Power etc.
C70600 Copper Nickel “90/10″ASTM B151, MIL C15726F, SAE J461, SAE J463C70600 (C706) & C71500 (C715), Copper nickel offers excellent corrosion resistance, especially in marine salt water environments. The main, wrought copper-nickel alloys chosen for sea water service contain 10 or 30 percent nickel. They also have important additions of iron and manganese which are necessary to maintain good corrosion resistance.Typical Uses for C706 Copper Nickel Power Steering Tube, Brake Lines
CONSUMER: Screw Lamp Bases
INDUSTRIAL: Condenser Plates, Condensers, Weld Torch Tips, Heat Exchanger Tubes, Valve Bodies, Evaporator Tubes, Pressure Vessels, Distiller Tubes, Pump Impellers for Oil Refining, Ferrules, Evaporators
MARINE: Boat Hulls, Tube Sheet for Salt Water Service, Salt Water Pipe Fittings, Salt Water Piping Systems, Salt Water Piling Wrap, Hot Water Tanks, Salt Water Baffles, Propeller Sleeves, Ship Hulls, Water Hoses
PLUMBING: FlangesSizes Available From Hehong Precision(New Huahong Copper)TUBE&PIPE: 1/4″ – 16” diameter , 6.35mm – 419mm diameter for seamless.
Bar:8-90,100,168mm diameter.
ASTM B135 JIS GB/T1527-2017 Straight Rectangular Oval Brass Tubes

C33000 Brass Tubing Yellow Brass Pipes

C26000 Seamless Brass Alloy Tube Oval Type

ASTM B135 Brass Tubes of Instrument with OD3mm-165mm

Copper Alloy Finned Tube for Heat Exchanger