What is Peeled / Turned Round Bar ? Peeling is Removal of outer surface of Bars by means of Rotating tool. Surface defects are deeper and proportional to the diameter of Bars, Removal of such defects is done by peeling where in a cut is given as per Requirement. Peeling leaves minor turning marks on the surface so often customers prefer to have peeled bars and if customer requires Peeled Bars without Tool marks then it needs to be Grinded through Center less Grinders.

We are involved in supplying and exporting out a huge range of Peeled Round Bars that are enquiry-btnhighly corrosion resistant, durable and have longer shelf life

Peeled / Turned Round Bar

Peeled / Turned Round Bar

Finish Description Finish accordingto 10088:2005
30
Peeled round bar
1X
32
Peeled round bar IT9
1X
31
Peeled and polished round bar
1X
34
Peeled, centerless groundand polished round bar
1G

Ø Length Tolerance(mm) Straightness Ovalshape
22.51-40.30
3000-7000
+25
1
máx. 50% del intervalo de tolerancia
40.31-85.72
3100-41005100-6100
+100
85.73-110.30
3100-41005100-6100
+200
Specifications may vary according to grade and finish. Other dimensions on request.

Short bars: 10% allowed (minimum length 2800 mm)

Useful information of Peeled / Turned Round Bar
Peeled / Turned Round Bar Chemical Composition
C
Si
Mn
Cr
P
S
V
W
0.26-0.36
0.15-0.50
0.15-0.40
3.0-3.75
≤0.03
≤0.02
0.30-0.60
8.50-10.00