C70600 Copper Nickel Tubes

Copper Nickel tubes, 10% – C70600 – exhibits excellent resistance to impingement attack. It is also highly resistant to SCC. This alloy is suitable for Marine condenser tube installations in place of Aluminum Brass, especially where higher water velocities are encountered.

UNS No. C70600 – BSI No. CN102 – ISO Name CuNi10Fe1Mn
Chemical Comp. (%) Cu rem / Ni 9 ~ 11 / Pb 0.05 / Fe 1 ~ 1.8 / Zn 1 max / Mg 1 max
ASTM Spec. B 111, B 395, B 466, B 552
ASME Spec. SB 111, SB 395, SB 466
Applications Condenser, Evaporator and Heat Exchanger tubes; Distiller tubing; Salt Water piping.
Temper O61 Annealed / H55 Light-Drawn

Properties * Metric English
Density 8.94 g/cc 0.323 lb/in³
Tensile Strength min.- O61 -/- H55 275 MPa -/- 310 MPa 40 ksi -/- 45 ksi
Yield Strength min.- O61 -/- H55 105 MPa -/- 240 MPa 15 ksi -/- 35 ksi
CTE, linear 17.1 10-6/°C @ 20.0 – 300 °C 9.5 10-6/°F @ 70.0 – 570 °F
Specific Heat Capacity 0.09 cal/g-°C @ 20ºC 0.09 BTU/lb-°F @ 70ºF
Thermal Conductivity 45 W/m-K @ 20.0 °C 26 BTU/ft2/ft/h/°F @ 70.0 °F
Melting Point 1099 – 1149 °C 2010 – 2100 °F

20ft GP: 5898mm (Length) x 2352mm (Width) x 2393mm (High)
40ft GP: 12032mm (Length) x 2352mm (Width) x 2393mm (High)
40ft HC: 12032mm (Length) x 2352mm (Width) x 2698mm (High)
Export market
Malaysia, Saudi Arabia, Singapore, Indonesia, Ukraine, Spain, Canada, USA, Brazil, Iran, Russia, Chile, Thailand, Korea, Egypt, Oman, Ireland, England, Mexico, Peru, Italy, Nigeria, Kuwait, Egypt, Holland, Vietnam etc

C122 Copper Tube available sizes
Tube Size Tube Length Wall Thickness Inside Dia. Outside Dia.
5/32″ 6 ft. 0.014″ 0.125 5/32″
3/16″ 6 ft. 0.014″ 0.125 3/16″
7/32″ 6 ft. 0.014″ 0.191 7/32″
1/4″ 5 ft. 0.035″ 0.250″ 3/8″
1/4″ 10 ft. 0.035″ 0.250″ 3/8″
3/8″ 2 ft. 0.049″ 0.375″ 1/2″
3/8″ 5 ft. 0.049″ 0.375″ 1/2″
3/8″ 10 ft. 0.049″ 0.375″ 1/2″
1/2″ 2 ft. 0.049″ 0.500″ 5/8″
1/2″ 5 ft. 0.049″ 0.500″ 5/8″
1/2″ 10 ft. 0.049″ 0.500″ 5/8″
5/8″ 2 ft. 0.049″ 0.625″ 3/4″
5/8″ 5 ft. 0.049″ 0.625″ 3/4″
5/8″ 10 ft. 0.049″ 0.652″ 3/4″
3/4″ 2 ft. 0.065″ 0.750″ 7/8″
3/4″ 5 ft. 0.065″ 0.750″ 7/8″
3/4″ 10 ft. 0.065″ 0.750″ 7/8″
1″ 2 ft. 0.065″ 1.000″ 1-1/8″
1″ 5 ft. 0.065″ 1.000″ 1-1/8″
1″ 10 ft. 0.065″ 1.000″ 1-1/8″
1-1/4″ 10 ft. 0.065″ 1.250″ 1-3/8″
1-1/2″ 10 ft. 0.072″ 1.500″ 1-5/8″
2″ 10 ft. 0.083″ 2.000″ 2-1/8″
2-1/2″ 10 ft. 0.095″ 2.500″ 2-5/8″
3″ 10 ft. 0.109″ 3.000″ 3-1/8″
4″ 10 ft. 0.134″ 4.000″ 4-1/8″
Alloy 122 Copper Refrigeration Tube Price
Outer Diameter Length Price
1/8″ 50 Ft $34.10
3/16″ 50 Ft $48.10 DHP Copper Tubes C12200
1/4″ 50 Ft $62.20
5/16″ 50 Ft $65.50 DHP Copper Tubes C12200
3/8″ 50 Ft $76.10
1/2″ 50 Ft $109.31 DHP Copper Tubes
5/8″ 50 Ft $128.25
Price is subject to change without any notification, please contact  Copper for final price of C122 Copper Tube

Ready stock, Special offer on below C122 Copper Pipe & Tube material
Copper Annealed Copper ACR Tube
Copper seamless Copper Welded Pipe
Copper Capillary Copper Coil Tube
Copper Seamless Pipe Copper Welded Tube
Copper Braid Inner Grooved Copper Copper Tube
Copper Finned Tube Copper Condenser Tube
Copper U-Bend Tube Copper Exhaust Tubing
Copper Square Tube Copper Gas Tube
Large diameter C122 Copper Tube Copper Straight Pipe
Thin wall C122 Copper Tubing Thin wall Copper Tube
Copper Tubing 1/8 C122 Copper Exhaust Tube

ASTM B466 C71500 Pipes Copper Nickel Tube

CuNi 90/10 Copper Nickel Pipe Fittings

Copper Alloy

Copper Lwc Coil Inner Grooved Tube for Air Conditioner

Copper Alloys before Using a Brass Angle or Bar for Your Project

ASTM B62 Copper Round Bars

Copper Round Rod Bar