Why does brass strip change color during production? 1. The direct cause of brass strip discoloration is residual acid on the surface of copper strip. 2. The soft Brass Belt is easier to change color than the hard Brass Belt. Because the annealing temperature of the soft copper strip is high, it is easy to [...]
Cause of edge burr of brass strip and solving Formation of edge burr in brass strip The shearing process of brass strip consists of two stages: pressing deformation stage and shearing sliding stage. When cutting brass strip, the material stress starts from elastic and plastic deformation. When the upper cutting edge descends to contact the [...]
Characteristics of brass strip production method: 1. Cold rolling of brass strip (1) Plastic deformation. (2) The pressure in the roll gap area is high, and there is a pressure distribution, * *, up to 2700mpa. (3) At the same time, there is friction along the rolling direction and the opposite rolling direction. (4) The [...]
Production process of brass strip The production process of brass strip is divided into 6 steps. Every step in the process of operation should be carefully operated to ensure product quality. Brass strip is a very common metal element, which is mainly conductive, heat conducting and corrosion resistant equipment. There are six areas for brass [...]
C46400 Naval Brass "Lead Free" SAE J461, AMS 4611, 4612, ASTM B21, FEDERAL QQ-B-639, SAE J463 Naval Brass C46400 is nominally composed of 60% copper, 39.2% zinc and 0.8% tin. As is typical of brass alloys with the duplex alpha + beta structure, C46400 has good strength and rigidity. By substituting tin for an equal [...]
COPPER SOLDER-JOINT FITTINGS OVERVIEW Copper Solder-Joint Fittings for supply/pressurized systems have been the leading brand of copper fittings for decades. Available in both wrot copper and cast bronze, our product selection has grown to become the most extensive in the industry. We are the acknowledged experts at engineering and manufacturing precision solder-joint copper fittings. Quality, [...]
Brass welding is an indispensable processing technology for repairing and processing copper materials. Welding, also known as welding and picking, is a common process and technology for joining alloys or other thermoplastic materials such as plastics by heating. Brass weldability Brass is a copper-zinc alloy. Because the boiling point of zinc is low, only 907 [...]
The main defects of perforated extruding brass pipes are internal and external surface defects and uneven wall thickness. In order to ensure that there are no oxides and bubbles on the internal and external surface of extruded brass pipes, peeling extrusion is also used in modern extrusion technology. When pipe peeling and extrusion, reasonable peeling [...]
Manufacturing Metal Brass Parts And Fittings Use of brass is common in human civilization since ancient time while steel came much later. With time the quality and usage of the metal has improved significantly. Brass can be a highly durable metal if handled with care. The use of brass fittings in automotive and agricultural industry [...]
Brass Pipe Reducing Bushings are designed for use in water, oil, natural gas, and steam applications. NPT connections. Max. pressure: 1200 psi, except Domestic Brass fittings Temp. range: -65° to 250°F. Nickel-Plated Brass Reducing Bushings offer a low-cost alternatives to stainless steel. They are ideal for applications where standard yellow brass cannot be used. Use [...]
Brass Plain Tower Bolts Size No Size 1. 2" x 1/4 50 x 6 mm 2. 21/2" x 1/4 63 x 6 mm 3. 3" x 1/4 75 x 6 mm 4. 21/2" x 5/16 63 x 8 mm 5. 3" x 5/16 75 x 8 mm 6. 4" x 5/16 100 x 8 mm [...]
We have carved a niche as one of the key Solid Brass Table Hinges Manufacturers & Exporters. Use of premium brass in the Brass Table Hinges assures the high durability and strength. Our Brass Butler Tray Table Hinges are available in double-hinged designs to open the hinge flush with a flat surface. Features Brass [...]
Brass Pivot Hinges, we offer, are known for their unparalleled quality and long lasting performance. Our Solid Brass Pivot Hinges are manufactured from optimum quality brass, using best techniques, in accordance to match the international quality standards. Brass Pivot Door Hinges, which we produce, are in huge demand for extra sturdiness and smooth finish. Today, [...]
90 Degree Elbows Brass Pipe Fittings Red Brass Elbows Class 125 resist corrosion from water, heat, saltwater, acids, minerals, and soils. Use with air, water, natural gas, and steam. Max. pressure: 125 psi Temp. range: -20° to 400°F; Raised Square Plugs are -20° to 300°F. 90 Degree Elbows Brass Pipe Fittings Chrome-Plated Brass [...]
