ASTM B36

/Tag:ASTM B36
  • YELLOW BRASS ALLOY C26000 CARTRIDGE BRASS 7030

YELLOW BRASS ALLOY C26000 CARTRIDGE BRASS “70/30”

YELLOW BRASS ALLOY C26000 CARTRIDGE BRASS "70/30" (CDA 260) ASTM B36 (Bar, Sheet, and Plate), ASTM B135 (Tubing), SAE J461 EN equivalent for this alloy CuZn30 CU FE PB ZN Min/Max 68.5 - 71.5 0.05 0.07 Rem Nominals 70.0000 - - 30.0000 C26000 ASTM B135 Brass Tubing, C26000 Brass Pipes ASTM B135 (Tubing) YELLOW [...]

By |November 12th, 2019|Brass Pipes, Brass Rods, Brass Shapes, Brass Tubes, Brass Tubing, DoWeDo News, Grade, PLATE, ROD, TUBING, Tubing, Tubing Material|Comments Off on YELLOW BRASS ALLOY C26000 CARTRIDGE BRASS “70/30”
  • 360 Brass Hex Bar

360 Brass Hex Bar

360 Brass Hex Bar 360 Brass hex bar has a tensile strength range of 15-47 KSI, conforming to ASTM B36 360 hex bar is used for highly formable parts, ammunition components, decorative parts, name plates, engraving plates, overlays, legend plates, lamp fixtures, hinges, flashlight shells, connectors, fittings, circuit board relays, electronic components, radiator tanks, brackets, [...]

By |October 29th, 2019|BAR, BRASS & COPPER, Brass Parts, Brass Rods, Brass Shapes, DoWeDo News, HEXAGONAL, Metal, Metal Knowledge, ROD|Comments Off on 360 Brass Hex Bar
  • 360 Brass Round Bar

360 Brass Round Bar’s Discounted Rate

360 Brass Round Bar's Discounted Rate Looking for 360 brass round bar at a discounted rate? We have 48 pieces (2531 lbs) available – diameter is 1.234 diameter (+-0.0025 tolerance) x 12 foot length and the stock is available in China. Price is as low as $2.45 per pound if you purchase 500+ pounds. This [...]

By |October 27th, 2019|BAR, BRASS & COPPER, Brass Parts, Brass Rods, Brass Shapes, DoWeDo News, Grade, Metal, Metal Knowledge, ROD|Comments Off on 360 Brass Round Bar’s Discounted Rate
  • 20 Gauge Brass Sheet 6x0.5inch

20 Gauge Brass Sheet 6×0.5″

20 Gauge Brass Sheet 6x0.5" 6x0.5" (15.25 x 1.25cm) half-hard solid brass metal sheet. Approximately 0.03" (0.81mm) thick, 20 gauge. Stampable cuff bracelet blanks. Slight surface imperfections are typical, and are easily removed with 000 steel wool. Remove plastic film before using. ASTM B36. 20-gauge is a great thickness for etching, piercing, stamping and other [...]

By |March 21st, 2019|BRASS & COPPER, Brass Shapes, Brass Sheet, Metal, PLATE, SHEET & COIL|Comments Off on 20 Gauge Brass Sheet 6×0.5″
error: Content is protected !!