Half Hard Temper ASTM B16 Brass Rods

//Half Hard Temper ASTM B16 Brass Rods
  • Half Hard Temper ASTM B16 Brass Rods

Half Hard Temper ASTM B16 Brass Rods, B 16 / B 16M Free-Cutting Brass Rod, Bar and Shapes, Brass Rod Material in All Kind of Shape-Brass Round Bar, Copper Alloy C36000 C3604 Brass Round Bar, ASTM B16 Standards – ASTM Specifications for Brass Rods

Product Name: Half Hard Temper ASTM B16 Brass Rods, Bar and Shapes

Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw
Machines
This standard is issued under the fixed designation B 16/B 16M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval.

A superscript epsilon (e) indicates an editorial change since the last revision or reapproval.

1. Scope*
1.1 This specification establishes the requirements for free-cutting brass rod, bar, wire, and shapes of any specified cross section produced from Copper Alloy UNS No. C36000 suitable for high-speed screw machining applications and moderate thread rolling.
1.2 Units—Values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appro-priate safety and health practices and determine the applica-bility of regulatory limitations prior to use.
2. Referenced Documents
2.1 ASTM Standards: 2
B 249/B 249M Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes, and

Forgings B 250/B 250M Specification for General Requirements for Wrought Copper-Alloy Wire
B 601 Practice for Temper Designations for Copper and
Copper Alloys—Wrought and Cast
E 8 Test Methods for Tension Testing of Metallic Materials
E 8M Test Methods for Tension Testing of Metallic Mate-rials [Metric]
E 18 Test Methods for Rockwell Hardness and Rockwell
Superficial Hardness of Metallic Materials

This specification establishes the requirements for free-cutting brass rod, bar, wire, and shapes of any specified cross-section produced from Copper Alloy UNS No. C36000 suitable for high-speed screw machining applications and moderate thread rolling. The chemical composition, temper, tensile, Rockwell hardness, and shape requirements are detailed.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1.1 This specification establishes the requirements for free-cutting brass rod, bar, wire, and shapes of any specified cross section produced from Copper Alloy UNS Nos. C36000 or C36010 suitable for high-speed screw machining applications and moderate thread rolling.

1.2 Units—Values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other and values from the two systems shall not be combined.

1.2.1 Within the text, SI units are shown in brackets.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Round Brass Tube

Thick Walled Brass Tube

Square Brass Tube

Rectangle Brass Tube

B 16 / B 16M Free-Cutting Brass Rod, Bar and Shapes

More
  • Affordable price
  • Customized design is Available
  • T/T, L/C or other payment accepted
  • Fast shipping, Worldwide delivery
  • Quality guaranteed
  • Bulk discounts for larger orders

Product Range

TYPE Brass Tube Round Circle
APPLICATION Industry , Construction , Furniture
STANDARD ASTM JIS ISO GB DIN BS
C26200 C2600 CuZn30 H68 CuZn30 CZ106
C27000 C2680 CuZn35 H65 CuZn33 CZ107
C27400 C2720 CuZn40 H62 CuZn37 CZ109
C28000 C2800 CuZn40 H59 CuZn40 CZ109
C37000 C3710 CuZn39Pb1 HPb59-1 CuZn40Pb2 CZ120
TEMPER Hard(Y) / Half Hard (Y2) / Soft (M)    / Light Soft(M2)
DIMENSIONS Per Your Requirement
PACKING Carton Boxes / Sealed Wooden Pallets
PAYMENT T.T / L.C At Sight
DELIVERY 3 Weeks
MOQ 300 Kgs
error: Content is protected !!