Finned Tube Heat Exchanger Copper Coils in Domestic Water Boilers

//Finned Tube Heat Exchanger Copper Coils in Domestic Water Boilers
  • Finned Tube Heat Exchanger Copper Coils in Domestic Water Boilers

Finned Tube Heat Exchanger Copper Coils in Domestic Water Boilers For Fuel Gas Condensers Refrigeration Condenser / Refrigeration Evaporator Tin-Plated Surface Copper C12200 / C12000 Finned Tube Coil as Heater in Drinking Water Systems​, Energy Saving Finned Copper Coil Heat exchanger For Process Coolers 0.75MM Wall Thickness, COPPER HOLLOW TUBE – SPECIAL BRASS TUBE – CUSTOMIZED BRASS TUBE CHINA SUPPLIER FACTORY

Finned Tube Heat Exchanger Copper Coils in Domestic Water Boilers Detailed Product Description
Material: C12000 / C12200 / C70600 Outer Diameter: 27.5mm
Inner Diameter: 16.5mm Wall Thickness: 1mm
Fin Height: 4.5mm FPI: 11
High Light: finned tube coil, finned coil heat exchangers

Quick Details:
1. Tube based on roll forming process
2. High thermal conductivity and compact design
3. Save cost and assembling space due to higher efficiency
4. ISO 9001:2008 quality certified
5. Well sold in USA, Australia, Germany, etc.

1. Optimized heat exchange performance of raw material with extruding process
2. Compact design consuming less assembling space
3. Flexible for customized design after soft annealing
4. Copper is a hygienic and antimicrobial material for use in drink water systems
5. Tin plating for both inside and outside surface is possible, if requested
6. Easier to stock after surface treatment
7. Resistance to both vibration and corrosion
8. Cost saving from longer service life and less assembling space

Tube Number Code System

Take Tube Number M-11045.180100.00 as example

M 11 045 180 100 00
 M=Medium Height



Minimum fins per Inch Fin Height in 1/10 mm Minimum Root Diameter in 1/10 mm Root Wall-thickness in 1/100 mm Code of Inner Surface




Process Flow:
1. Order raw material due to customers’ requirements.
2. Inspection on raw material at arrival
3. Roll forming the fin tube, while monitoring the whole process / Extruding or finning process
4. Cut into required length
5. Inspection on specification of finned tube
6. If required, we provide de-fin process, soft annealing, bending and coiling, welding connectors
7. Clean procedure, pressure test and drying
8. Packing for delivery

The finned tube coils or heat exchangers are mainly used in heating(gas-fired boilers, condensing boilers, flue gas condensers), in heating of drink waters and as tankless water heaters, in mechanical and automotive engineering(oil coolers, mine coolers, air coolers for diesel engines), in chemical engineering(gas coolers and heater, process cooler), in power plants(air cooler, cooling tower), and in nuclear engineering(uranium enrichment plants). Tin-Plated Surface Copper C12200 / C12000 Finned Tube Coil

These Copper & Copper alloy high finned tube is intergrally extexded for the maximum surface area to achieve high tube efficiency.
A good finned tube can be made by the strict conditions such as copper density, grain size and hardness.
The heat transfer ratio of this high finned tube is about 8~9 times higher than other plain copper tube. High Thermal Copper Finned Coil Heat Exchangers For Fuel Gas Condensers
high fin tube
Dr : Outside diamefer of bare tube
• Df : Out diameter of finned section
• Di : Inside diameter
• Pt : Fin pitch
• Ht : Fin height
• Fw : Wall thickness of fin section
• L : Finned tube length
Product Range
• Bare tube diameter : 19mm ~ 25mm
• Pitch : 5 ~ 9 FPI
• Fin height : 7mm ~ 11mm
• Length : 10,000mm(Max.)

  • Affordable price
  • Customized design is Available
  • T/T, L/C or other payment accepted
  • Fast shipping, Worldwide delivery
  • Quality guaranteed
  • Bulk discounts for larger orders

Product Range

error: Content is protected !!