Custom Seamless / ERW Hollow Tubing Brass Tubes Stockist, Hollow Brass Rectangular Pipe, SPECIAL Hollow rods capillary brass tube pipe, Thin-walled brass pipe tubes, Large Diameter Brass Pipe, Brass tubes, BRASS HOLLOW TUBE – SPECIAL BRASS TUBE – CUSTOMIZED BRASS TUBE CHINA SUPPLIER FACTORY 1. Square hollow brass pipe is used for both architectural and […]
C360 Naval Brass Hex Bar, Standard Tolerance Hexagon Brass Rod, Unpolished (Mill) Finish Brass Bar Hexagon, Hexagonal Brass Mill Rod, Brass Half Hard Hex Bar, C36000 Brass Bar, Hexagonal Brass Rod China Factory
C360 Naval Brass Hex Bar Product features
360 brass, also known as free-machining brass, provides corrosion resistance and better machinability than 353 brass
Meets ASTM B16 specifications
Unpolished (mill) surface has no finish
H02 temper has been cold worked to a 1/2 hard temper
The 360 brass hex bar with H02 temper is unpolished, meets American Society for Testing and Materials International ASTM B16 specifications, and has a precision tolerance. The 360 brass alloy, also known as free-machining brass, provides corrosion resistance and better machinability than 353 brass due to a higher lead content. The material has an H02 temper, meaning it has been cold worked to a 1/2 hard temper.
Copper, brass, and bronze are known as red metals because they contain copper, which has a reddish color. Copper, a term that applies to alloys containing at least 99.3% copper, offers very high thermal and electrical conductivity and provides corrosion resistance, formability, and machinability. Brass is an alloy of copper and varying levels of zinc, sometimes with additional elements. It provides greater strength and better machinability than copper or bronze. Bronze is commonly an alloy of copper and tin, but sometimes it is copper alloyed with other elements such as aluminum, phosphorus, manganese, or silicon. Tin gives bronze more corrosion resistance than brass and greater strength than copper. Copper and its alloys have temper designations, meaning the material has undergone a process to achieve certain properties of strength and hardness.
Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. Corrosion resistance describes the material’s ability to prevent deterioration caused by atmosphere, moisture, or other medium. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Formability indicates how easily the material can be permanently shaped. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded.
Our C36000 Hex Brass Bar are widely exported to countries and regions such as the United States, Europe, Russia, Turkey, Malaysia, the UAE, Saudi Arabia, Iran, Brazil, Chile, Mexico, South Africa, Jordan, Tunisia, Vietnam, Indonesia, Thailand, Singapore, Colombia, and Sri Lanka.
Free-Cutting Brass, Copper Alloy No. C36000 (Alloy 360 a standard alloy of copper and zinc containing about three percent lead. The basic 60-40 mixture of copper and zinc forms an alloy with good strength and corrosion resistance; the small amount of lead provides the superior machinability that gives the alloy it familiar name. With these three constituent elements copper, zi and lead the alloy is cometely recyclable.