ASTM B135 JIS GB/T1527-2017 Straight Rectangular Oval Brass Tubes, Yellow Brass Pipes, 330 / C330 / C33000 Brass Tube, ASTM B135 Seamless Brass Tube OD3mm-165mm, ASME SB135 Seamless Round Oval Brass Tubes, C33000 C330 Hollow Metal Brass Tubing, Brass Pipes, ASTM B135/B135M Standard Brass Tubing China Supplier Factory ASTM B135 JIS GB/T1527-2017 Straight Rectangular Oval […]
Brass C330 Round Tube, Flame Cutting Brass Tube, C330 Round Brass Hole Punching Pipes, Laser Cutting Miter Cutting Brass Tubing, Notching Plasma Cutting Copper Brass Tube, Free Cutting Shearing C330 Brass, Sourcing Hard-to-Find Water Jet Cutting
Standard mill sizes for Brass C330 Round Tube range from 3/16″ (OD) X 0.032″ (Wall) X 0.123″ (ID) all the way up to 4″ (OD) X 0.128″ (Wall) X 3.744″ (ID). Other sizes may be available. Contact your local Metal Supermarkets store to confirm availability and pricing.
Normally only available in tubing products, it has a good balance of workability and, because of the presence of lead, machinability.
Applications: Industrial: Power and Pump Cylinder Liners, Power and Pump Cylinders; Ordnance: Primers. Plumbing: plumbing accessories, pump lines, trap lines, j bends, plumbing brass goods.
Analysis: Cu – 66% Zn – 33.5% Fe – .07% Pb – .5%
Common Fabrication Processes: Forming and bending, machining, piercing and punching.
Mechanical Properties: (room temperature, 68º F (20ºC)
Ultimate Tensile Strength (psi) 65,300
Yield Strength (psi) 50,000
Elongation (%) 32
Rockwell Hardness B80
Machinability: Machinability rating is 60. Hot Forming: Poor. Cold Working: Excellent. Joining Techniques: Excellent for: Soldering. Good for: Brazing; Fair for: Oxyacetylene, gas shield arc, spot and butt welding.; Not Recommended for: Coated metal arc and seam welding.
Brass is commonly used for decorative purposes primarily because of its resemblance to gold. It is also a commonly used to make musical instruments due to its high workability and durability.
Other Brass Alloys
Tin Brass
This is an alloy that contains copper, zinc and tin. This alloy group would include admiralty brass, naval brass and free machining brass. The tin has been added to inhibit dezincification (the leaching of zinc from brass alloys) in many environments. This group has low sensitivity to dezincification, moderate strength, high atmospheric and aqueous corrosion resistance and excellent electrical conductivity. They possess good hot forgeability and good cold formability. These alloys are typically used to make fasteners, marine hardware, screw machine parts, pump shafts and corrosion-resistant mechanical products. brass c260 tube