Brass Strip - Brass is an alloy of copper and zinc the proportions of zinc and copper can be varied to create a range of brasses with varying properties. It has a shiny yellow colour that darkens over time and is about as dense as bronze but not quite as strong. Brass can be used [...]
Measures to solve discoloration in brass strip production 1. Control the acid concentration during pickling. When the oxide layer on the surface of annealed brass strip is washed away, the high acid concentration is meaningless. On the contrary, if the concentration is too high, the residual acid attached to the surface of the brass belt [...]
Solutions to common problems of brass strip: 1. Solution of brass strip discoloration (1) Control the acid concentration during pickling. When the oxide layer on the surface of annealed brass strip is washed away, the high acid concentration is meaningless. On the contrary, if the concentration is too high, the residual acid attached to the [...]
Characteristics of brass strip production method: 1. Cold rolling of brass strip (1) Plastic deformation. (2) The pressure in the roll gap area is high, and there is a pressure distribution, * *, up to 2700mpa. (3) At the same time, there is friction along the rolling direction and the opposite rolling direction. (4) The [...]
Production process of brass strip The production process of brass strip is divided into 6 steps. Every step in the process of operation should be carefully operated to ensure product quality. Brass strip is a very common metal element, which is mainly conductive, heat conducting and corrosion resistant equipment. There are six areas for brass [...]
