TUNGSTEN, TUNGSTEN ALLOYS & COPPER TUNGSTEN

Pure Tungsten

DWDBRASS can supply commercially pure unalloyed Tungsten in a wide variety of sizes and shapes for immediate shipping or we can supply custom sizes, shapes and finished parts with a short lead time. Eagle Alloys Corporation is capable of supplying raw material or finished parts to our customer’s specifications.

DWDBRASS Alloys supplies DRC Conflict Free material only.

Tungsten has the highest melting point of the refractory metals, high density, and low coefficient of thermal expansion. It offers exceptionally high strength and good electrical resistivity at very high temperatures. Unalloyed Tungsten is very difficult to machine and fabricate. DWD can furnish finished parts in this material in relatively quick turnaround times. We can also supply 1%, 1.5%, 2% Lanthanated, 1%, 2%, 3%, 4% Thoriated Tungsten, Tungsten Rhenium Alloys & Tungsten Carbide.

TUNGSTEN, TUNGSTEN ALLOYS & COPPER TUNGSTEN

TUNGSTEN, TUNGSTEN ALLOYS & COPPER TUNGSTEN

Tungsten Forms Available
Tungsten WIRE
Tungsten ROD
Tungsten BAR
Tungsten STRIP
Tungsten FOIL
Tungsten SHEET
Tungsten PLATE
Tungsten TUBING
Tungsten BLANKS
Tungsten COIL
Tungsten BILLET
Tungsten SEMI-FINISHED
Custom FINISHED PARTS

Pure Tungsten
Chemical Composition % max Density Melting Point Symbol ASTM-B-760
Unalloyed Tungsten per ASTM-B-760 19.25 g/cm^3 – 7 lb/in^3 3422°C/6192°F W
Tungsten Balance
Carbon 0.01%
Oxygen 0.01%
Nitrigen 0.01%
Iron 0.01%
Nickel 0.01%
Silicon 0.01%

*Note: ASTM-B-760 applies to plate, sheet , and foil.  Rod and bar are chemistry only.  Tungsten materials can be fabricated and custom produced to customer’s specifications. Above data is for informational purposes only.  Eagle Alloys is not liable for accuracy of these contents or applications. Finished part drawings may be forwarded to a third party for outsourcing.

Tungsten Alloys

DWDBRASS Alloys Corporation can offer a wide variety of High Density Machinable Tungsten Alloy sizes and compositions for immediate shipping or we can supply custom grades, shapes and finished parts with a short lead time. Eagle Alloys can supply alloys ranging from 90% to 97% Tungsten and contain nickel, copper and or iron binders for applications where high density and machinability are required. We can supply magnetic as well as non-magnetic Tungsten Alloys. Eagle Alloys Corporation is capable of supplying raw material or finished parts as well as custom grades to our customer’s specifications.

DWDBRASS supplies DRC Conflict Free material only.

Tungsten Alloy Grades
EA17 EA17M EA17.5 EA17.5M EA17.7 EA18 EA18M EA18.5M
W Content,
nom. (Wt%)
90 90 92.5 92.5 93 95 95 97
Binder Elements Ni + Cu or Ni + Fe Ni + Fe Ni + Cu or Ni + Fe Ni + Fe Ni + Fe +Mo Ni + Cu or Ni + Fe Ni + Fe Ni + Fe
Density Gms/cc 17 nom. (16.85-17.30) 17 nom. (16.85-17.30) 17.5 nom. (17.15-17.85) 17.5 nom. (17.15-17.85) 17.7 nom. 18 nom. (17.75-18.35) 18 nom. (17.75-18.35) 18.5 nom. (18.25-18.85)
Density Lbs./cu in. 0.61 0.61 0.63 0.63 0.64 0.65 0.65 0.67
Ultimate Tensile Strength 94ksi / 648Mpa min. 110ksi / 758Mpa min. 94ksi / 648Mpa min. 110ksi / 758Mpa min. Produced to Customer’s Specifications 94ksi / 648Mpa min. 105ksi / 724Mpa min. 100ksi / 689Mpa min.
Yield Strength at 0.2% Offset 75ksi / 517Mpa min. 75ksi / 517Mpa min. 75ksi / 517Mpa min. 75ksi / 517Mpa min. Produced to Customer’s Specifications 75ksi / 517Mpa min. 75ksi / 517Mpa min. 75ksi / 517Mpa min.
Elongation % min. 2% min. 5% min. 2% min. 5% min Produced to Customer’s Specifications 1% min. 3% 2%
Hardness (HRC) max. Unworked (As Sintered or Annealed) 32 max 32 max 33 max 33 max Produced to Customer’s Specifications 34 max 34 max 35 max
Coefficient of Thermal Expansion x 10^-6/◦C 4~6 4~6 4~6 4~6 4~6 4~6 4~6
Magnetic Properties None Slight None Slight Slight None Slight Slight
ASTM-B-777-15 Class 1 Class 1 Class 1 Class 2 N/A Class 3 Class 3 Class 4
AMS-T-21014 Class 1 Class 1 Class 1 Class 2 N/A Class 3 Class 3 Class 4
MIL-T-21014D Class 1 Class 1 Class 1 Class 2 N/A Class 3 Class 3 Class 4
AMS 7725E Class 1
Type 1
Class 1
Type 2
Class 1
Type 1
Class 2
Type 2
N/A Class 3
Type 1
Class 3
Type 2
Class 4
Type 2

*Note: HT = Heat Treated.  Copper Tungsten Alloy materials can be fabricated and custom produced to customer’s specifications. Above data is for informational purposes only. DWD is not liable for accuracy of these contents or applications. Finished part drawings may be forwarded to a third party of outsourcing.

Copper Tungsten Alloys

DWDBRASS can supply the below grades of Copper Tungsten metal composite materials as well as custom grades to meet your specific needs. DWD can supply various sizes and compositions for immediate shipping or we can supply custom grades, shapes and finished parts with a short lead time. These metal composite materials produce dense hard metals with low thermal expansion, good thermal and electrical conductivity, excellent arc resistance, superior wear resistance and strength at elevated temperatures.

Pure Tungsten Forms Available
Copper Tungsten WIRE
Copper Tungsten ROD
Copper Tungsten BAR
Copper Tungsten STRIP
Copper Tungsten FOIL
Copper Tungsten SHEET
Copper Tungsten PLATE
Copper Tungsten TUBING
Copper Tungsten BLANKS
Copper Tungsten SEMI-FINISHED
Custom FINISHED PARTS

Copper Tungsten Alloy Grades
Copper % Tungsten % ASTM-B-702-93 RWMA
W50/Cu50 48-52% Cu Balance Class A
W55/Cu45 43-47% Cu Balance Class 10
W56/Cu44 42-46% Cu Balance Class 10
W60/Cu40 38-42% Cu Balance Class B
W65/Cu35 33-37% Cu Balance
W68/Cu32 28-32% Cu Balance Class 10
W68/Cu32HT 30-34% Cu Alloy Balance
W70/Cu30 28-32% Cu Balance Class C Class 10
W75/Cu25 23-27% Cu Balance Class D Class 11
W75/Cu25HT 23-27% Cu Alloy Balance
W78/Cu22 20-24% Cu Balance Class 12
W80/Cu20 18-22% Cu Balance Class E Class 12
W85/Cu15 13-17% Cu Balance
W90/Cu10 8-12% Cu Balance

*Note: HT = Heat Treated.  Copper Tungsten Alloy materials can be fabricated and custom produced to customer’s specifications. Above data is for informational purposes only.  DWD is not liable for accuracy of these contents or applications. Finished part drawings may be forwarded to a third party of outsourcing.

Sheet & Plate: (Heavy Alloys Are Stocked In 12” x 12”)
.002″ x 12″ x 36″ .050″ x 12″ x 36″ .750″ x 12″ x 36″
.004″ x 12″ x 36″ .060″ x 12″ x 36″ 1.00″ x 12″ x 36″
.005″ x 12″ x 36″ .080″ x 12″ x 36″ 1.50″ x 12″ x 36″
.010″ x 12″ x 36″ .125″ x 12″ x 36″ 2.00″ x 12″ x 36″
.015″ x 12″ x 36″ .188″ x 12″ x 36″ 2.50″ x 12″ x 12″
.020″ x 12″ x 36″ .250″ x 12″ x 36″ 3.00″ x 12″ x 12″
.025″ x 12″ x 36″ .375″ x 12″ x 36″ 3.50″ x 12″ x 12″
.030″ x 12″ x 36″ .500″ x 12″ x 36″ 4.00″ x 12″ x 12″
.040″ x 12″ x 36″ .625″ x 12″ x 36″
Rod: (Heavy Alloys Are Stocked In 12 Inch lengths)
.125″ dia x 72″ .750″ dia x 72″ 2.00″ dia x 72″
.188″ dia x 72″ .875″ dia x 72″ 2.25″ dia x 36″
.250″ dia x 72″ 1.00″ dia x 72″ 2.50″ dia x 36″
.375″ dia x 72″ 1.25″ dia x 72″ 3.00″ dia x 36″
.500″ dia x 72″ 1.50″ dia x 72″ 3.50″ dia x 36″
.625″ dia x 72″ 1.75″ dia x 72″ 4.00″ dia x 36″
Wire:
.00059” dia x 50 ft .0008” dia x 50 ft .001” dia x 50 ft
.0015” dia x 50 ft .002″ dia x 50 ft .025″ dia x 50 ft
.003″ dia x 50 ft .005″ dia x 50 ft .008″ dia x 50 ft
.010″ dia x 50 ft .015″ dia x 50 ft .020″ dia x 50 ft
.030″ dia x 50 ft .035″ dia x 50 ft .040″ dia x 50 ft
.045″ dia x 50 ft .050″ dia x 50 ft .060″ dia x 50 ft
.062″ dia x 50 ft .080″ dia x 50 ft .090″ dia x 50 ft
.125″ dia x 50 ft
Ribbon Thicknesses:
.002″ .006″ .012″
.003″ .007″ .015″
.004″ .008″ .020″
.005″ .010″ .025″
Finished Parts:
Finished parts and custom sizes can be produced quickly!

Brass Hollow Round Bars

BRASS EXTRUSIONS & PROFILE SECTIONS

Brass Round Extrusion Bar

C38000 Brass Seamless Bars

Cuzn37 Brass Tube